[ Flute repair, Pads exchange, Flute sales, and Various music articles sales ] Kawabe Flute Kobo

Repair Charge

After actually seeing your flute, I estimate the repair cost because the repair cost is different depending on states of musical instruments, the production years, and models, etc.
First of all, please feel free to inquire.
Please contact me by the telephone before coming to our office.
Repair name Content of repair and adjustment Required time Charge
Adjustment of balance and pad Adjustment of pad match.
Correction of going mad about key mechanism connection.
30 minutes - 2 hours Please ask it.
Exchange pad When it tears, it hurts, it shrinks, and the symptom of the adhesion etc. with the tone hall that cannot be adjusted is caused in the pad, it partially exchanges it. 2 hours - a few days Please ask it.
Exchange all pad (a) All pads are newly exchanged, and it adjusts it completely. In the flute that adjusts to this repair, years have not passed since after it bought it or the overhaul was given, and the correction of the mechanism is almost unnecessary.
5 days - a week
(Reservation necessary)
Please ask it.
Exchange all pad (b) The cleaning after disassembling of the key mechanism, the knock pin, the felt, and the cork, etc. are exchanged, all pads are exchanged newly, and it adjusts it completely.
10 days - 2 weeks
(Reservation necessary)
Please ask it.
Exchange all pad (c) The whole in addition to pad all exchanges (b) is polished and raised. 3 weeks
(Reservation necessary)
Please ask it.
Overhaul (a) Consumed parts such as the corrections such as another of the pad all exchanges, the key posts, and washers, wicks, pipes, and the screws are exchanged when the damage of the mechanism is violent, and it reproduces on the function side. 3 weeks
(Reservation necessary)
Please ask it.
Overhaul (b) Both corrections of overhaul (a) and the dent, the wound is removed, the whole is polished, and the function side and externals reproduce near the new article. 3 weeks
(Reservation necessary)
Please ask it.
Starting dent
The dent of the tube is mended, polished, and finished up. 1 day and more Please ask it.
Soldering The washer and the ring, etc. are soldered. 1 day and more Please ask it.
Wax putting
The wax putting such as cups is done the pipe in the mechanism part. 1 day and more Please ask it.
Cleaning after disassembling
The wick and the pipe in the mechanism part are taken apart, it is dirty, removes old
oil etc. , and new oil is injected.
1 hour and more Please ask it.
Please let me answer according to the inquiry.
Kawabe Flute Kobo Inc. 5-4,Ninowari,Yokosukacho,Tokaishi,Aichiken,Japan TEL/FAX 0562-33-3850
©2007- KAWABE-FLUTE-KOBO INC. All Rights Reserved